ALCATEL OAW-AP1451-RW cao cấp hỗ trợ Wi-Fi 6E được thiết kế để đáp ứng nhu cầu dung lượng lớn và mật độ cao của mạng di động thế hệ tiếp theo và mạng hỗ trợ IoT .
Điểm truy cập này tận dụng phổ tần mới có sẵn cho Wi-Fi trong băng tần 6GHz. Nó mang lại khả năng kết nối xa hơn, nghĩa là Wi-Fi 6E mang lại tốc độ nhanh hơn, kênh rộng hơn và độ trễ thấp hơn.
Điểm nổi bật
- Được trang bị ba băng tần 2,4Ghz/5Ghz/6Ghz phục vụ nhu cầu di động thế hệ tiếp theo và mạng lưới hỗ trợ IoT với mật độ rất cao và dung lượng lớn.
- Một radio chuyên dụng để quét, giúp cải thiện đáng kể tính bảo mật mạng và chất lượng Wi-Fi.
- Điểm truy cập hỗ trợ thông lượng tối đa 10Gbps (1147Mbps ở 2,4GHz, 4,8Gbps ở 5GHz, 4,8Gbps ở 6GHz), với đường truyền lên kép 10Gbps để phục hồi POE và chia sẻ tải.
- Nó có thể được triển khai theo ba chế độ khác nhau, tất cả đều thông qua một phiên bản phần mềm duy nhất giúp đơn giản hóa hoạt động CNTT.
- Tích hợp radio Bluetooth/Zigbee lý tưởng cho nhiều điểm cuối IoT và ứng dụng như phân tích vị trí và tự động hóa tòa nhà
Đặc trưng
- Điểm truy cập này hỗ trợ các tính năng 802.11ax, bao gồm OFDMA, DL MU-MIMO, UL MU-MIMO, điều chế 1024-QAM, TWT, v.v., giúp không gian làm việc kỹ thuật số đa dạng của tương lai trở nên cực kỳ đáng tin cậy và hiệu quả.
- Cung cấp khả năng bảo mật nâng cao với WPA3.
- Đám mây được kích hoạt với OmniVista Cirrus Network Management as a Service
- Triển khai tại chỗ với Hệ thống quản lý mạng OmniVista 2500
- Có thể hoạt động trong kiến trúc cụm để cung cấp triển khai cắm và chạy đơn giản cho tối đa 255 AP
- Hỗ trợ các tham số chất lượng dịch vụ (QoS) được tinh chỉnh để phân biệt và cung cấp QoS phù hợp cho từng ứng dụng như chia sẻ giọng nói, video và máy tính để bàn.
- Công nghệ RDA tự động chỉ định kênh (DFS) và cài đặt nguồn (TPC) và đảm bảo rằng các điểm truy cập tránh xa mọi nguồn nhiễu tần số vô tuyến (RFI) để cung cấp WLAN đáng tin cậy và hiệu suất cao.
- Orthogonal frequency division multiple access (OFDMA) enabling more clients to simultaneously operate in the same channel and thereby improve efficiency, latency and OFDMA can concurrently address multiple clients in both directions downlink (DL) and uplink (UL), including OFDMA Resource Units
(RUs). OFDMA is very effective in environments where there are many devices with short frames demanding lower latency
- Multi-user multiple input, multiple output (MU-MIMO) allowing more data to be transferred at once and enables an access point to handle a larger number of concurrent clients
- 1024 quadrature amplitude modulation mode (1024-QAM) which can boost peak data-rates by as much as 25 percent
- BSS Coloring improves spatial reuse in dense environments by providing a mechanism for colour coding different overlapping BSS’s, allowing more simultaneous transmissions
- Extended Range (ER) provides increased coverage in scenarios where the receiving side encounters high path loss and channel delay spread, especially in outdoor environments
- Target Wake Time (TWT) makes Wi-Fi 6 devices more power efficient. This capability lets client devices sleep much longer, and wake up to less contention, extending the battery life of smart phones, IoT sensors, and other devices.
- Transmit beamforming improves signal power, resulting in significantly higher rates at a given range
Product specifications
Feature | Description |
Radio specification | • AP type: Indoor Wi-Fi 6E (802.11ax)
• Tri Radio, 6 GHz High 4×4:4, 5 GHz 8×8:8, and 2.4 GHz 4×4:4 ¬ 6 GHz High: 4×4:4 up to 4.8 Gbps wireless data rate to individual 4SS HE160 802.11ax client devices. ¬ 5 GHz: 8×8:8 up to 4.8 Gbps wireless data rate to individual 8SS HE80 or 4SS HE160(80+80) 802.11ax client devices. ¬ 2.4 GHz: 4×4:4 up to 1147 Mbps wireless data rate to individual 4SS HE40 802.11ax client devices. • Supported frequency bands (country-specific restrictions apply): ¬ 2.400 to 2.4835 GHz ¬ 5.150 to 5.250 GHz ¬ 5.250 to 5.350 GHz ¬ 5.470 to 5.725 GHz ¬ 5.725 to 5.850 GHz ¬ 5.925 to 6.425 GHz ¬ 6.425 to 6.525 GHz ¬ 6.525 to 6.875 GHz ¬ 6.875 to 7.1250 GHz • Available channels: Dependent on configured regulatory domain • Brazil: Maximum transmit power: 24 dBm on 2.4 GHz, 24 dBm on 5 GHz • Maximum transmit power (limited by local regulatory requirements): ¬ 24 dBm on 2.4GHz (18 dBm per chain) ¬ 27 dBm on 5 GHz (18 dBm per chain) ¬ 22 dBm on 6 GHz (16 dBm per chain) • DFA (Dynamic Frequency Adjustment) optimises available channels and provides proper transmission power • Short guard interval for 20-MHz, 40-MHz, 80-MHz and 160-MHz channels • Transmit beamforming (TxBF) for increased signal reliability and range • 802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU) • Supported data rates (Mbps): ¬ 802.11b: 1, 2, 5.5, 11 ¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 ¬ 802.11n (2.4 GHz): 6.5 to 300 (MCS0 to MCS7, HT20 to HT40) ¬ 802.11n (5 GHz): 6.5 to 600 (MCS0 to MCS7, HT20 to HT40) ¬ 802.11ac: 6.5 to 3466 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160(80+80)) ¬ 802.11ax (2.4 GHz): 3.6 to 1147 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE40) ¬ 802.11ax (5 GHz): 3.6 to 4804 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160(80+80)) ¬ 802.11ax (6 GHz): 3.6 to 4804 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160) • Supported modulation types: ¬ 802.11b: BPSK, QPSK, CCK ¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM ¬ 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM • 802.11n high-throughput (HT) support: HT 20/40 • 802.11ac very high throughput (VHT) support: VHT 20/40/80/160 • 802.11ax high efficiency (HE) support: HE 20/40/80/160 • Advanced Cellular Coexistence (ACC) ¬ Minimises interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/ femtocell equipment • 2.4/5 GHz 1×1 radio, dedicated for scanning • Bluetooth 5/Zigbee: up to 6 dBm transmit power (class 1) and -93 dBm receive sensitivity • 2x multi-Gigabit 1/2.5/5/10 Gig autosensing RJ-45 ports, Eth0-Eth1, Power over Ethernet (PoE) 802.3bt compliant • 1x USB 3.0 Type A (5V, 500mA) • Console • Reset button: Factory reset |
Visual indicators (Tri-color LED) | • For system and radio status
¬ Red flashing: System abnormal, link down ¬ Red light: System startup ¬ Red and blue rotate flashing: System running, OS upgrading ¬ Blue light: System running, dual bands working ¬ Green flashing: System running, no SSID created ¬ Green light: System running, single band working ¬ Red, blue and green rotate flashing ¬ System running, use for location of an AP |
Feature Description | |
Security | • Integrated Trusted Platform Module (TPM 2.0) for secure storage of credentials and keys
• 802.11i, WPA2, WPA3, Enterprise with CNSA Option, Personal (SAE) • 802.1X • WEP, Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP) • Firewall: ACL, wIPS/wIDS and DPI application policy enforcement with OmniVista • Portal page authentication |
Antenna | • Integrated omni-directional antennas with maximum antenna gain of 3.9 dBi in 2.4 GHz, 3.9 dBi in 5 GHz, 3.9 dBi in 6 GHz and 3.5 dBi in BLE. Maximum beamforming gain of 9.92 in 2.4GHz, 12.93dBi in 5GHz and 9.82dBi in 6GHz. |
Receive sensitivity | 2.4 GHz 5 GHz 6 GHz
1 Mbps -99 11 Mbps 6 Mbps -91 54 Mbps -94 -93 HT20(MCS0/8) -77 -77 HT20(MCS7/15) -94 -93 HT40(MCS0/8) -76 -76 HT40(MCS7/15) -91 -91 VHT20(MCS0) -74 -74 VHT20(MCS8) -94 -93 VHT40(MCS0) -72 -72 VHT40(MCS9) -91 -91 VHT80(MCS0) -68 -68 VHT80(MCS9) -88 HE20(MCS0) -64 HE20(MCS11) -94 -93 -93 HE40(MCS0) -65 -65 -65 HE40(MCS11) -91 -91 -90 HE80(MCS0) -62¸ -62 -62 HE80(MCS11) -88 -87 HE160(MCS0) -59 -59 HE160(MCS11) -84 -56 |
Feature | Description |
Power | • Supports direct DC power and Power over Ethernet (PoE)
• When both power sources are available, DC power takes priority over PoE • Direct DC source: • 48V DC nominal, +/- 5% • Power over Ethernet (PoE): • IEEE 802.3bt compliant source • Maximum (worst case) power consumption: • 49W (input IEEE 802.3bt POE); Unrestricted functionality • 45W (input dual IEEE 802.3at POE); The USB port is disabled • 24W (input IEEE 802.3at POE); The USB port is disabled, Eth1 is disabled, tri radio downgrade to 2 x 2 |
Mounting | • Ceiling/wall mounting (Mount kit needs to be ordered separately) |
Environment | • Operating:
¬ Temperature: 0°C to 45°C (-32°F to +113°F) ¬ Humidity: 10% to 90% non-condensing • Storage and transportation: ¬ Temperature: -40°C to +70°C (-40°F to +158°F) ¬ Humidity: 5% to 95% non-condensing |
Dimension | • Single AP excluding packing box and accessories:
¬ 260mm (W) x 260mm (D) x 60mm (H) – 10.23” (W) x 10.23” (D) x 2.36” (H) ¬ 2370 g/5.23 lb • Single AP including packing box and accessories: ¬ 298mm (W) x 317mm (D) x 111mm (H) – 11.73” (W) x 12.48” (D) x 4.37” (H) ¬ 2830 g/6.23 lb |
Reliability | • MTBF: 572,332h (65.33 years) at +25º C operating temperature |
Capacity | • Up to 8 SSID/Radio (24 BSSID/AP), hardware ready for 16 SSID per radio (48 SSID/AP)
• Support for up to 1536 associated client devices |
Software feature | • Up to 4K APs when managed by OmniVista 2500. No limit on number of AP groups
• Up to 255 APs per web managed (HTTP/ HTTPS) cluster • Auto channel selection • Auto transmit power control • Bandwidth control per SSID • L2 roaming • L3 roaming with OmniVista 2500 • Captive portal (Internal/External) • Guest self-registration optional SMS notification) with OmniVista 2500 • Internal user database • RADIUS client • Guest social-login with OmniVista 2500 • RADIUS proxy authentication with OmniVista 2500 • LDAP/AD proxy authentication with OmniVista 2500 • Wireless QoS • Band steering • Client smart load balance • Client sticky avoidance • User behavior tracking • White/Block list • Zero-touch provisioning (ZTP) • NTP Client • ACL • DHCP/DNS/NAT • Wireless MESH P2P/P2MP • Wireless Bridge • Rogue AP location and containment • Dedicated Scanning AP • System log report • SSHv2 • SNMPv2, SNMPv3 • Wireless attack detection with OmniVista 2500 • Floor plan and heat map with OmniVista 2500 • Stanley Healthcare/Aeroscout RTLS support |
Feature | Description |
IEEE standard | • IEEE 802.11a/b/g/n/ac/ax
• IEEE 802.11e WMM, U-APSD • IEEE 802.11h, 802.11i, 802.11e QoS • IEEE 802.1Q (VLAN Tagging) • 802.11k Radio Resource Management • 802.11v BSS Transition Management • 802.11r Fast roaming • 802.11w Protected Management Frames |
Regulatory
and certification |
• CB Scheme Safety, cTUVus
• Wi-Fi CERTIFIED Wi-Fi 6E, Passpoint R3 • FCC • CE Marked • EN 60601-1-1 & EN 60601-1-2 • Bluetooth SIG • RoHS, REACH, WEEE • EMI and susceptibility (Class B) • UL2043 Plenum Rating • 2014/35/EU Low Voltage Directive • 2014/30/EU EMC Directive • 2011/65/EU RoHS Directive • 2014/53/EU Radio Equipment Directive • EN 55032 • IEC/EN 60950 and 62368 • EN 300 328 • EN 301 893 • EN 301 489-1 • EN 301 489-17 • EN 303 687 |
Ordering information
Access Points | Description |
OAW-AP1451-RW | OmniAccess Stellar Indoor AP1451. Tri radio 2.4+5+6GHz 4×4+8×8+4×4 Wi-Fi6E, integrated omni antenna. 1×1 scanning, BLE/Zigbee radio. 2x 10GE up, 1x RS-232 Console, USB, 48V DC. AP mount to be ordered separately. Not for use in US, Egypt, Japan. |
OAW-AP1451-US | OmniAccess Stellar Indoor AP1451. Tri radio 2.4+5+6GHz 4×4+8×8+4×4 Wi-Fi6E, integrated omni antenna. 1×1 scanning, BLE/Zigbee radio. 2x 10GE up, 1x RS-232 Console, USB, 48V DC. AP mount to be ordered separately. Restricted Regulatory Domain: US. |
Accessories | Description |
AP-MNT-IN-BE
(single pack) |
Indoor mounting kit enhanced, Type B1 (9/16) and Type B2 (15/16) for T shaped ceiling rail mounting. Applicable for OmniAccess Stellar AP1101, AP12xx, AP13xx and AP14xx series. |
OAW-AP-MNT-W
(single pack) |
Mounting kit, Type A wall mount and ceiling mount with screws. Applicable for OmniAccess Stellar Indoor 1101, 12xx, AP13xx and AP14xx series |
OAW-AP- MNT-W-10
(10 pack) |
Mounting kit, Type A wall mount and ceiling mount with screws. Applicable for OmniAccess Stellar Indoor 1101, 12xx, AP13xx and AP14xx series. |
AP-MNT-IN-CE
(single pack) |
Indoor mounting kit enhanced, Type C1 (Open Silhouette) and C2 (Flanged Interlude), for other shaped ceiling rail mounting. Applicable for OmniAccess Stellar AP1101, AP12xx, AP13xx and AP14xx series. |
POE60U-1BT-X-R | 1-Port IEEE 802.3bt PoE Midspan. Port speed 10G PoE power 60W. No power cord included. Please order PWR-CORD-XX for country specific power cord. |
ADP-50GRBD | 48V/50W AC-to-DC Power Adapter with Type A DC plug 2.1*5.5*9.5mm circular, straight. Please order PWR-CORD-XX for country specific power cord. |
MUA THIẾT BỊ MẠNG ALCATEL Ở ĐÂU !
Hiện nay đơn vị phân phối thiết bị mạng alcatel OAW-AP1451-RW chính hãng tại việt nam là INTERSYS TOÀN CẦU, INTERSYS với tâm thế đem tới những trải nghiệm về công nghệ tốt nhất, tiện lợi nhất cho người dùng.Vậy nên chúng tôi, INTERSYS phân phối độc quyền các sản phẩm ALCATEL trên toàn quốc.
THIẾT BỊ MẠNG ALCATEL CÓ TỐT KHÔNG !
Về độ bền và công năng sử dụng của Thiết Bị Mạng Alcatel OAW-AP1451-RW đã được nhiều đánh giá người dùng phản hồi rất tích cực và hài long khi các kỹ sư cùng đội ngũ kỹ thuật sử dụng qua nhiều thời gian đã chứng mình Thiết Bị Mạng Alcatel rất tốt,có độ bền cao,có nhiều tính năng phù hợp.
THIẾT BỊ MẠNG ALCATEL CÓ ĐẮT KHÔNG !
Trong lĩnh vực Thiết Bị Mạng, Thiết Bị Mạng Alcatel năm trong phân khúc tầm trung giá không quá cao như Thiết Bị Mạng CISCO và cũng không quá thấp như TP-Link.
THÔNG TIN LIÊN HỆ INTERSYS TOÀN CẦU
CÔNG TY INTERSYS TOÀN CẦU phân phân phối chính hãng thiết bị viễn thông như : CISCO,UPS,LS,IBM,HPE,ATEN,KINAN,APC,AVOCENT,DELL,FOTIGATEvvv..,Hiện nay Intersys Toàn Cầu đã cung ứng đến hầu hết tất cả các quý khách hàng lớn trong nước và ngoài nước như THAILAND,HONGKONG,KOREA,INDONESIA,LAO,CAMPUCHIA,..vv.
Chúng Tôi ( INTERSYS GLOBAL ) luôn đem lại sự hài lòng cũng như sự uy tín về chất lượng sản phẩm tới tay Quý Khách Hàng.Mọi thiết bị INTERSYS TOÀN CẦU cung cấp đều có đầy đủ giấy tờ về mặt pháp lý như CO,CQ,PL,IV,…
Để Nhận Thông Tin Hỗ Trợ Báo Giá Dự Án, Đặt Hàng, Giao Hàng, Bảo Hành, Khuyến Mại của các sản phẩm Giá Rẻ tại INTERSYS TOÀN CẦU
Đánh giá
Chưa có đánh giá nào.